Business & building signage

The sign on your building is doing your marketing 24 hours a day

Channel letters, monuments, storefront signs, and pylon cabinets — designed, permitted, fabricated, and installed by one local team that has done it up and down the 15 corridor.

What we build and install

If it goes on the outside of a building and has to survive weather, wind, and a city inspector, it’s what we do.

Storefront

Illuminated channel letters

Individually fabricated LED letters mounted to your facade or a raceway. The default for retail centers, and usually what the landlord’s sign criteria specifies.

Curb appeal

Monument signs

Ground-level signs in stone, stucco, or aluminum at your driveway entrance. Single tenant or a multi-tenant directory that can be updated as suites turn over.

Visibility

Pylon & pole signs

High-visibility signs built to be read from the freeway or a busy arterial. New structures, plus refaces and LED retrofits of existing cabinets.

Cost-effective

Dimensional letters & panels

Non-illuminated cut metal or acrylic letters and painted panels. A strong look for office and industrial buildings where lighting isn’t required.

Everywhere else

Window & door graphics

Hours, logos, frosted privacy film, and full window displays — including the address and suite numbering the fire department wants to see.

Keep it working

Sign repair & LED retrofits

Half-lit sign, dead ballast, faded face? We service what other people built, and swapping old fluorescent guts for LED usually pays for itself in power savings.

Signs we’ve built and hung

Storefronts, monuments and pylons across the valley and beyond — Temecula to Riverside, Palm Desert and San Diego.

What you get from us that you don’t get everywhere

  • A site survey before we quote, so the number reflects your actual building
  • Permit drawings and submittal to whichever city you are in — we have filed in over a dozen
  • Landlord and property-management sign criteria handled on your behalf
  • UL-listed electrical assemblies built to code
  • Installation by our own licensed crews with our own lift equipment
  • A written warranty on both materials and workmanship

How a building sign project runs

  1. Site surveyWe come out, measure the facade, photograph the elevation, and check what the sign criteria and city ordinance allow.
  2. Design & quoteYou see a rendering of the sign on a photo of your actual building, with a firm price attached.
  3. PermitsWe prepare the drawings and submit. This is usually the longest step — plan on a few weeks depending on the city.
  4. Fabricate & installWe build it, schedule the install, and handle the final inspection. You get the finished photo for your Google listing.

Why local businesses call us first

One shop, one point of contact, from the first sketch to the last bolt. No subcontracting your project out and hoping it comes back right.

We design it, build it, and install it

Layout, fabrication, and installation all happen under one roof. That means one accountable team and no finger-pointing when a deadline is tight.

We deal with the city, you don’t

Every city writes its own sign ordinance, and we have pulled permits in more than a dozen of them — Temecula, Murrieta and Menifee weekly, but also Hemet, Perris, Riverside, Palm Desert and San Diego. We handle the submittal and the landlord approvals.

Franchise muscle, neighborhood service

Signarama is a 700+ location network, so we have national material buying power — but you’re dealing with the owner here in Temecula, not a call center.

Questions we get asked

How long does the whole process take?

Design and fabrication are usually two to four weeks. Permitting is the variable — budget three to six weeks depending on the city and whether your center has a landlord approval step. Start earlier than you think you need to, especially if you have a grand opening date.

Do I really need a permit?

For nearly any permanent exterior sign, yes. Going without one risks a red tag, fines, and being made to take the sign down. We handle the submittal as part of the project so it’s not something you have to learn.

My landlord has sign criteria. Is that a problem?

Not at all — it’s normal in Temecula’s retail centers, and we read those documents all the time. Send us the criteria packet and we’ll design to it so approval isn’t a fight.

Can you fix or reface the sign that’s already there?

Usually. Refacing an existing cabinet with new graphics is dramatically cheaper than a new structure, and it often skips a full permit. We’ll tell you honestly whether the existing can is worth keeping.

What does a storefront sign cost?

Illuminated channel letter sets commonly run in the low-to-mid four figures depending on letter height, count, and how the power gets there. Monuments vary widely with materials and foundation work. A site survey turns that into a real number.

Ready to get a number on this?

Tell us what you need

Send the details and we’ll come back with a real number — same business day. If it’s easier to talk it through, call the shop.

We reply the same business day. No spam, ever.

Call (951) 304-9993 Get a quote